Estimate shipping
Description
Description
Important: After replacing a new rack, test if the rack and pinion are engaging properly before use the machine.
Here is how: manually pull the rack out a bit and use the handle to engage the rack and pinion, then press the rack further down, there should be no or very little gap between the rack and pinion.
Rack for Forestwest Kinetic Log Splitter, please refer to images for detail.
* Special note: How to choose 15 & 18 Ton Rack Gen 1 and Gen 2:
Please measure your current rack and compare to the following specification to choose the right size
Rack and Pinion must in matching generation, mixture use of those parts could damage the machine.
| (inch) | 15&18 Ton Rack Gen 1 | 15&18 Ton Rack Gen 2 |
|
Overall Length |
24 ⁵¹/₆₄ | 24 ⁵¹/₆₄ |
| Bolt Hole to Teeth | 6 ¹/₂ | 6 ¹⁹/₆₄ |
|
Spring Hole to Teeth |
³⁵/₆₄ | ²³/₆₄ |
other measurement
| 10ton | 12ton | 15/18ton | 34ton | |
| Full length | 22- 5/16" | 22-5/16" | 24-3/4" | 35-3/8" |
| Width | 15/16" | 1-9/16" | 1-9/16" | 1-15/16" |
| Weight | 8 lbs | 11 lbs | 12 lbs | 25 lbs |
Shipping Cost
Want to save more on the shipping? Please contact us if:
-
You have commercial address with loading dock
-
You'd like to pick up at carrier's depot